期刊： TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING, ; ()
The interface reaction between solid titanium alloy and liquid aluminium is critical to understanding the evolution of the intermetallic compound (IMC......
期刊： TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING, ; ()
A N, N'-methylene diacrylamide-based cross-linking copolymer film was thermally polymerised on a 6063 Al alloy using ethylene glycol maleic rosinate a......
期刊： TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING, ; ()
To improve the corrosion resistance of magnesium (Mg) alloy under the physiological environment, fabrication of fluoridated hydroxyapatite (FHA) coati......
期刊： TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING, 2021; 99 (2)
The corrosion rates of Ni-W, Co-W, Ni-Mo, and Co-Mo electrodeposited coatings after two-hour immersion tests in HNO3, H2SO4 and HCl environments were ......
期刊： TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING, 2021; 99 (2)
Superhydrophobicity is widely observed in nature with the tendency of a natural surface to be characterised by a water-repellent capability. Over the ......
期刊： TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING, 2020; 98 (3)
Sherardising is a surface protection method for obtaining an Fe-Zn coating on a steel surface by thermal diffusion. This paper proposes a model to stu......
期刊： TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING, 2020; 98 (3)
A comprehensive literature review of the existing techniques for removing and repairing of damaged thermal barrier coatings is presented, with the foc......
期刊： TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING, 2020; 98 (5)
The present work is concerned with the corrosion resistance of AA6061 aluminium alloys with tantalum films in hydrochloric acid- and chloride-containi......
期刊： TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING, 2020; 98 (6)
Ceramic coatings containing calcium and phosphorus were prepared on the surface of Ti-3Zr-2Sn-3Mo-25Nb by micro-arc oxidation. The effects of Ca/P rat......
期刊： TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING, 2020; 98 (1)
In the present work, a novel electroplating cell with both jet array and crossflow induced by the small holes on the side walls is proposed. The flow ......
期刊： TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING, 2020; 98 (1)
A series of TiO2-Al2O3 composite coatings were prepared on 310S stainless steel through metal-organic chemical vapour deposition (MOCVD) for suppressi......
期刊： TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING, 2020; 98 (1)
Sub-micron (0.1-0.3 mu m) BN(h) particles were incorporated into Ni-P plating coatings to enhance their mechanical and tribological properties. The mo......
期刊： TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING, 2020; 98 (2)
Flexible polyaniline/carbon fibres (PANI/CFs) nanocomposites with comb-shaped polyaniline (PANI) nanorods were fabricated by using a one-step pulse cu......
期刊： TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING, 2019; 97 (2)
This work builds on papers published in Transactions during 2015 and 2018 reporting research into low-cost commercial methods for the prevention of ni......
期刊： TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING, 2019; 97 (3)
A special target structure for erbium (Er)-zirconium (Zr) co-deposition is proposed, based on the hollow cathode effect. To study the effect of rare e......
