In this work, wire electrical discharge machining (WEDM) of aluminum (LM25) reinforced with fly ash and boron carbide (B4C) hybrid composites was perf......
The mechanical properties and microstructure evolution of an Al-Cu-Li alloy sheet processed via hot rolling (HR) (at 400 degrees C and 500 degrees C) ......
This work presents a non-destructive method for quantitative essessment of fatigue damage of materials with linear elastic properties using nonlinear ......
Nano-Y2O3 reinforced Ti-47.7Al-7.1Nb-(V, Cr) alloy was fabricated by a powder metallurgy route using spark plasma sintering (SPS), and the influence o......
This study investigates the non-isothermal reduction of iron ore fines with two different carbon-bearing materials using the thermogravimetric techniq......
High-entropy alloys (HEAs) with multiple constituent elements have been extensively studied in the past 20 years, due to their promising engineering a......
The thermodynamics of manganese oxide in high-MnO-containing slags was investigated using the chemical equilibrium method in the temperature range of ......
The effect of the addition of bismuth on the dynamic recrystallization (DRX) behavior of the matrix has been investigated by comparing coarse grain pu......
The tungsten (W) foil laminate is an advanced material concept developed as a solution for the low temperature brittleness of W. However, the deformed......
High-power disk laser welding a steel plate using the Inconel 82 (IN82) filler wire with a 1.2 and 3.0 m/min feeding rate has been investigated in the......
According to the material nature, aluminum alloys are widely applied in aerospace, construction, and automotive applications due to their characterist......
The effects of anodized titanium (Ti) with a potential hydrogen fluoride (HF) acid pretreatment through cathodization on the formation of nano-porous ......
The present work is devoted to the numerical analysis of the high-power laser beam welding of thick sheets at different welding speeds. A three-dimens......
Self-passivating Metal Alloys with Reduced Thermo-oxidation (SMART) are under development for the primary application as plasma-facing materials for t......
Recently, DC53 die steel was introduced to the die and mold industry because of its excellent characteristics i.e., very good machinability and better......
