期刊： INTERNATIONAL JOURNAL OF METALCASTING, ; ()
A study was conducted on the effects of various influencing factors in the compound hardening process, including core box temperature, such hot-air pa......
期刊： INTERNATIONAL JOURNAL OF METALCASTING, ; ()
In this study, the effects of Zr and Sr on the microstructure, tensile properties and in vitro biocorrosion behavior of Mg-4Zn alloy were investigated......
期刊： INTERNATIONAL JOURNAL OF METALCASTING, ; ()
The quality of the sand core directly affects the quality of the casting during the casting process. The establishment of an information link between ......
期刊： INTERNATIONAL JOURNAL OF METALCASTING, ; ()
The effects of the squeeze casting process on the microstructure, mechanical properties and wear characteristics of hypereutectic Al-Si-Cu-Mg alloys h......
期刊： INTERNATIONAL JOURNAL OF METALCASTING, ; ()
In the present study, the solidification pathway, microstructure and thermal conductivity of Fe-rich Al-x Si (x = 5, 7, 9, wt%, the same below) alloys......
期刊： INTERNATIONAL JOURNAL OF METALCASTING, ; ()
This paper has developed a new compound curing agent powder for a modified phosphate binder (3 wt% of raw sand). This combination can be self-cured an......
期刊： INTERNATIONAL JOURNAL OF METALCASTING, ; ()
The evolution of the silicon phase of hypereutectic Al-20Si alloys and Zn-27Al-3Si alloys with the addition of Sr (0, 0.06, 0.1, and 0.2 wt%) was inve......
期刊： INTERNATIONAL JOURNAL OF METALCASTING, ; ()
Mg-Zn-Ca alloy has a good development prospect in biomedical alloy. However, its development is restricted by large hot tearing susceptibility. Herein......
期刊： INTERNATIONAL JOURNAL OF METALCASTING, ; ()
Semisolid rheological technology is an advanced casting process that can significantly refine the microstructure and improve the mechanical properties......
期刊： INTERNATIONAL JOURNAL OF METALCASTING, ; ()
The investigated metal-metal composites were produced by the compocasting process using the standard zinc-aluminium alloy ZA-27 as a matrix and titani......
期刊： INTERNATIONAL JOURNAL OF METALCASTING, 2020; 14 (1)
The work presents the calculations of enthalpy of formation as well as Gibbs energy of reduction of silicon dioxide by aluminum. This way, the possibi......
期刊： INTERNATIONAL JOURNAL OF METALCASTING, 2020; 14 (1)
The effect of Yttrium (Y) addition on hot tearing susceptibility of Mg-6Zn-1Cu-xY-0.6Zr (x = 0, 1, 2, 3) alloys was investigated using a constrained r......
期刊： INTERNATIONAL JOURNAL OF METALCASTING, 2020; 14 (1)
Single-crystal (SX) turbine blade is the key component for aero-engines. However, the quality of the SX turbine blade is limited by the stray grain de......
期刊： INTERNATIONAL JOURNAL OF METALCASTING, 2020; 14 (4)
This paper elucidates the effects of micro-alloying (Cr, Mo, rare earth and Ag) on the microstructure, element distribution and mechanical properties ......
期刊： INTERNATIONAL JOURNAL OF METALCASTING, 2020; 14 (4)
In this study, an inorganic sand core that exhibited high tensile strength was fabricated by sodium silicate, silica sand, as well as silica fume. The......
