期刊： JOURNAL OF ADVANCED CONCRETE TECHNOLOGY, 2021; 19 (4)
Concrete structures serving in cold and wet regions usually suffer frost damage and thus have server deterioration. Many researches have been conducte......
期刊： JOURNAL OF ADVANCED CONCRETE TECHNOLOGY, 2021; 19 (3)
The resistivity of fresh concrete was obtained for the period from casting to the age of 72 h by a non-contact electrical resistivity measurement. Ear......
期刊： JOURNAL OF ADVANCED CONCRETE TECHNOLOGY, 2021; 19 (5)
Cr3+ and Cu2+ can be cured using basic magnesium sulfate cement (BMSC). The influence of compressive strength, water resistance, and leaching characte......
期刊： JOURNAL OF ADVANCED CONCRETE TECHNOLOGY, 2021; 19 (6)
This paper presents an experimental study investigating the actual mechanical performance of a full-scale reinforced concrete beam that served for 60 ......
期刊： JOURNAL OF ADVANCED CONCRETE TECHNOLOGY, 2021; 19 (3)
High-strength and lightweight are two of the most important parameters for composites in the construction field. Here, we developed a novel foam concr......
期刊： JOURNAL OF ADVANCED CONCRETE TECHNOLOGY, 2021; 19 (6)
Addition of sulphoaluminate expansive agent could be one useful method to reduce the shrinkage crack destruction of shotcrete. While the setting and h......
期刊： JOURNAL OF ADVANCED CONCRETE TECHNOLOGY, 2021; 19 (8)
Artificial intelligence technology has super high-dimensional nonlinear computing capabilities, intelligent comprehensive analysis and judgment functi......
期刊： JOURNAL OF ADVANCED CONCRETE TECHNOLOGY, 2021; 19 (4)
The purpose of this study is to improve the interfacial performance between the concrete and polymer cement mortar (PCM) by using nano-SiO2. This stud......
期刊： JOURNAL OF ADVANCED CONCRETE TECHNOLOGY, 2020; 18 (11)
The bond behaviour of plain rebars embedded in ambient cured geopolymer concrete (GPC) prepared with a mix of fly ash and ground granulated blast furn......
期刊： JOURNAL OF ADVANCED CONCRETE TECHNOLOGY, 2020; 18 (11)
Rebar corrosion is a main cause affecting the durability and safety of reinforced concrete structures. Many mathematical models (empirical and analyti......
期刊： JOURNAL OF ADVANCED CONCRETE TECHNOLOGY, 2020; 18 (11)
In this paper, the specimens of phosphor-gypsum (PG) based binder and the specimens of its lightweight mortar (LM), further the specimens of its light......
期刊： JOURNAL OF ADVANCED CONCRETE TECHNOLOGY, 2020; 18 (11)
Basic magnesium sulfate (BMS) cement was prepared by magnesia with different reactivities derived from calcination of basic magnesium carbonate at 600......
期刊： JOURNAL OF ADVANCED CONCRETE TECHNOLOGY, 2020; 18 (1)
In this paper, the effects of retarding admixture, polycarboxylate (PCE) superplasticizer and supplementary cementitious material (SCM) on the rheolog......
期刊： JOURNAL OF ADVANCED CONCRETE TECHNOLOGY, 2020; 18 (2)
Based on the ultra-high-rise pumping concrete engineering test with pumping height of 407 m and maximum pumping pressure of 19.3 MPa, the variation of......
期刊： JOURNAL OF ADVANCED CONCRETE TECHNOLOGY, 2020; 18 (3)
Superabsorbent polymers (SAPs) can effectively reduce the risk of concrete cracks by acting as an internal curing material. In this study, H-1 low-fie......
