期刊: MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2021; 52 (4)
In the vibration cast-rolling process, the metal material is in the state of sub-rapid solidification. Based on the principle of solidification and ra......
期刊: MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2021; 52 (8)
In order to improve the material properties of Populus tomentosa, and increase its utilization rate for furniture products. Two modification methods, ......
期刊: MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2021; 52 (9)
Biodegradable Zn-0.45Li alloys with high strength and ductility were successfully fabricated by hot extrusion and multi-pass drawing to obtain ultrafi......
期刊: MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2021; 52 (4)
In this study, the heat treatment processes for U75 V heavy rail were studied systematically. Further, a simple and convenient method for measuring pe......
期刊: MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2021; 52 (6)
The fatigue-creep interaction performance of Incoloy 825 nickel-based superalloy at 650 degrees C was investigated through introducing the tensile, co......
期刊: MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2021; 52 (7)
The rectangular macro-segregation region in the core of hot-rolled steel bar has a great influence on the heat treatment distortion of an automotive g......
期刊: MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2021; 52 (5)
In this paper, an iron coating was designed to fabricate on the surface layer of pure aluminum. The effects of process parameters such as immersion pl......
期刊: MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2021; 52 (5)
The in-situ V8C7-V3B4/Fe45 composites were fabricated by vacuum sintering using ferrovanadium, carbon black and Fe45 alloy powders as raw materials. T......
期刊: MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2021; 52 (4)
The corrosion performance of tinplate with different coating mass in H2SO4 solution has been investigated by electrochemical measurements and scanning......
期刊: MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2021; 52 (5)
In order to solve the problems of high power consumption and low output damping force of magnetorheological dampers, the relationship model between th......
期刊: MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2021; 52 (7)
As the connection between the center of rotor cage and the coarse powder collecting cone, rotor cage chassis of the turbo air classifier directly infl......
期刊: MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2021; 52 (7)
In this study, the aluminum alloy lattice structure was processed using selective laser melting, and the compressive behaviour was studied. When the p......
期刊: MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2021; 52 (1)
In this work, sodium has been successfully doped into the layered lithium-rich manganese-based cathode material through melt impregnation. The as-prep......
期刊: MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2021; 52 (8)
The Ti2AlNb-based self-lubricating composite material reinforced with silver particles of 0 wt% to 15 wt% was prepared by spark plasma sintering, and ......
期刊: MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2021; 52 (1)
X-ray diffraction analysis, scanning electron microscopy and thermodynamic calculations in the Miedema's model were used to study the extension of sol......