期刊： INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2021; 98 ()
Field-assisted sintering technology (FAST), as a fast densification method with low process temperature, was used to manufacture self-passivating tung......
期刊： INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2021; 99 ()
The anisotropy and stability of the mechanical properties of the W alloy plate (W-0.4 wt% Y-2(Zr)O-3, designed as WYZ) reinforced with Y-Zr-O particle......
期刊： INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2021; 98 ()
Fine-grained Mo alloys doped with uniformly distributed nanoscale Y2O3 particles were successfully prepared by employing two powerful strategies: fabr......
期刊： INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2021; 97 ()
Severe through-thickness texture inhomogeneity is apt to occur during hot-rolling of tungsten. This raises the intriguing notion of how is the inhomog......
期刊： INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2021; 100 ()
In this work, the deformation behavior of irradiated tungsten at elevated service temperatures is examined using mechanism-based crystal plasticity fi......
期刊： INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2021; 97 ()
Elongated lamellar bands parallel to rolling plane are usually formed in ?-fiber of Ta?W alloys at high strains. However, in this study, a type of lam......
期刊： INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2021; 98 ()
Considering the frequent occurrence of adhesion failure of the cemented carbide tool during interrupted cutting of heavy parts, resulting in the sudde......
期刊： INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2021; 99 ()
In this study, novel MoNbW(TaC)x composites with eutectic-like structures were firstly prepared by arc melting. The composites consisted of body-cente......
期刊： INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2021; 99 ()
Basalt fiber (BF), a cheap and attractive fiber, was introduced into tungsten carbide (WC)-based diamond composite materials to study the effect of di......
期刊： INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2021; 100 ()
WC particle-reinforced coating with high hardness and excellent wear resistance has been concerned extensively. In this paper, a method via powder cor......
期刊： INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2021; 100 ()
The W-Mo-HfC composites were prepared by using the conventional powder metallurgy with the two different sintering temperature and the same forging te......
期刊： INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2021; 99 ()
Orientation-dependent phenomenon, which is ubiquitous in polycrystals and proceeds from plastically anisotropy within each grain, give rise to a non-u......
期刊： INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2021; 98 ()
For the coating/substrate combination, the substrate and the coating influence each other. Different coating combinations have different effects in cu......
期刊： INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2021; 99 ()
In this study, 85-xWC-xTiC-15wt%Al2O3 (x = 0, 5, 10 and 20 wt%) composites were fabricated via hot pressing sintering technology. The influences of Ti......
期刊： INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2021; 97 ()
Adopting CoCrNi medium-entropy alloy (MEA) with high strength and toughness as the binder metal can be a solution for the property improvement of cerm......
