期刊： SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2021; 26 (6)
The variation of interface microstructure along thickness direction and the associated effects on tensile strength were studied. Thin intermetallic co......
期刊： SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2021; 26 (7)
Ultrasonic assisted friction stir welding (UaFSW) and conventional friction stir welding (FSW) were conducted on AA6061 and Ti6Al4V alloys. Smaller wa......
期刊： SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2021; 26 (5)
Residual stress controlling is crucial for the service security of weldments. In this work, experimental measurements and finite element method were i......
期刊： SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2021; 26 (4)
As-cast in-situ nanoparticle reinforced CuSn10Zn2Fe1.5Co0.5 (wt-%) alloy was selected as base metal (BM) and filler for welding. Butt joints were obta......
期刊： SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2021; 26 (5)
Ultrasonic vibration (UV)-enhanced friction stir welding (UVeFSW) is used for welding of 2195 Al-Li alloy plates. A model is developed to study the he......
期刊： SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2021; 26 (7)
Al13Cr23.5Fe20Co20Ni23.5 high-entropy alloy with three phases (face-centered cubic [FCC], A2 and B2) was joined successfully by direct drive friction ......
期刊： SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2021; 26 (7)
Dual laser-beam bilateral synchronous welding (DLBSW) technology has been widely used in the connection of skin-stringer T-joint. In this study, DLBSW......
期刊： SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2021; 26 (4)
A two-dimensional computational fluid dynamics model is established to verify the correlation between periodic material flow and tool eccentricity dur......
期刊： SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2021; 26 (5)
The effect of modifying microstructure and texture by electric current on mechanical properties of electrically assisted stationary shoulder friction ......
期刊： SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2021; 26 (6)
Realising high-quality welding of the peak aged Cu-Cr-Zr alloy has always been a big challenge. Under a low rotation rate of 400 rev min(-1), equiaxed......
期刊： SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2021; 26 (6)
Al/steel butt-joints are hard to be fusion welded because of the easily formed and unevenly distributed brittle intermetallic compounds (IMCs) at the ......
期刊： SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2021; 26 (7)
Conventional friction stir welding (FSW) AZ61 Mg alloy weld usually exhibits an Al supersaturated alpha-Mg solid solution with an intense basal textur......
期刊： SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2021; 26 (6)
A clinch-resistance hybrid spot welding method was presented to join Al and steel. The nugget formation was analysed via microstructure observation an......
期刊： SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2021; 26 (5)
The suppression mechanism of keyhole-induced porosity of oscillating laser beam welding (OLBW) was investigated via numerical simulation with keyhole ......
期刊： SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2021; 26 (7)
In this study, copper/steel composite tubes were produced by an underwater explosive welding process. Scanning electron microscopy, energy dispersive ......
