期刊： JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2021; 35 (7)
The topology optimization (TopOpt) is adopted in this article to design tip geometries of a turbine blade. Its principle is to modify the porosity, wh......
期刊： JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2021; 35 (7)
Flow separation is a common phenomenon on vertical-axis wind turbine (VAWT), delaying or restraining flow separation is very beneficial to improve the......
期刊： JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2021; 35 (9)
A numerical study was performed to investigate the combustion characteristics of hydrogenated catalytic biodiesel (HCB)/gasoline reactivity controlled......
期刊： JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2021; 35 (6)
In this paper, electro-hydraulic coupling jet printing technology based on the Weissenberg effect is put forward for the first time, and the pulse vol......
期刊： JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2021; 35 (6)
A novel method for type synthesis of lower-mobility decoupled parallel mechanism with redundant constraints is proposed. Firstly, the definition of th......
期刊： JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2021; 35 (7)
To quantitatively detect the gear pitting, this paper proposes a vision measurement method based on deep convolutional generative adversarial network ......
期刊： JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2021; 35 (8)
To examine the influence of the groove shape of a friction disk on the transient temperature field in the engagement process of aviation wet friction ......
期刊： JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2021; 35 (9)
Studies show that the formation of stable electrical contact between a graphite cylinder and a copper electrode is essential for generating a stable h......
期刊： JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2021; 35 (5)
To enhance the friction and wear resistance of GCr15/PTFE sliding contact surfaces, the synergistic lubrication effect of micro-textures and solid lub......
期刊： JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2021; 35 (8)
This paper provides an efficient way to estimate the accuracy performance of the Tricept machine tool under load. Both joint clearances and link flexi......
期刊： JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2021; 35 (8)
Titanium alloy Ti6Al4V, an alpha-beta alloy, possesses many advantageous properties, such as high special strength, good resilience and resistance to ......
期刊： JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2021; 35 (9)
To coordinate the contradiction between artillery launching performance indexes under parameter uncertainty, this paper proposes an artillery structur......
期刊： JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2021; 35 (5)
Aiming at the problem that the membrane structure is prone to creases in the process of folding and compaction, a proxy model is used to replace the c......
期刊： JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2021; 35 (7)
Aero-engine blades often fracture failed due to resonance. In order to analyze the vibration characteristics of high-speed rotating blades of aero-eng......
期刊： JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2021; 35 (5)
Fault diagnosis for rolling bearing under variable speed is always a challenging topic since the vibration signal has time-varying characteristics. To......
