期刊: JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY, 2021; 57 (2)
The friction and wear behaviors of a Fe-19Cr-15Mn-0.66N high nitrogen austenitic stainless steel (HNSS) were investigated. Tribological investigations......
期刊: JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY, 2021; 57 (2)
In this paper, four binary Ni-13.4 at.% Al/Ni-17.7 at.% Al diffusion couples were first prepared and subjected to homogenization at 1573 K for 10,800 ......
期刊: JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY, 2021; 57 (2)
The vanadium slag (V-slag) is generated from smelting vanadium titanomagnetite ore, which contains valuable elements, such as V, Ti, Cr, Fe, and Mn. T......
期刊: JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY, 2021; 57 (2)
Hardness is an essential mechanical indication of cemented carbides. The current work presents an approach to predict the hardness of three-phase WC-C......
期刊: JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY, 2021; 57 (2)
The gas-solid-based synergistic reduction of pellets is an innovative and effective method for iron ore smelting. With the development and utilization......
期刊: JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY, 2021; 57 (2)
Solubility of CO2 in molten Li2CO3-LiCl was measured by a pressure differential method, and the enthalpy change of the solution was calculated on that......
期刊: JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY, 2021; 57 (2)
Pyrite concentrates with refractory gold and silver were roasted at different temperatures to improve the recovery of the metals by cyanide leaching. ......
期刊: JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY, 2021; 57 (2)
To recycle vanadium from V-bearing steelmaking slag and V-bearing black shale, both were jointly roasted to generate vanadium-rich phase, and then van......
期刊: JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY, 2021; 57 (2)
The reduction of copper content in converting slag using process control is significant to copper smelter. In this study, the slags produced from the ......
期刊: JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY, 2021; 57 (1)
Mechanical soft reduction (MSR) is an effective method for elimination of the centerline segregation and porosity of the continuous casting steel slab......
期刊: JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY, 2021; 57 (1)
A three-dimensional (3D) multi-phase field model was established to simulate normal grain growth in pure iron. The advanced visualization technology w......
期刊: JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY, 2021; 57 (1)
To improve the wear resistance of gamma-TiAl alloy, Ta alloy layer was prepared on surface by double glow plasma surface allaying technique. The tribo......
期刊: JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY, 2021; 57 (1)
The NiCr/YSZ coating was fabricated on gamma-TiAl alloy by double glow plasma surface metallurgy technology and multi-are ion plating technology. The ......
期刊: JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY, 2021; 57 (1)
The study on the surface morphology and crystal orientation of the Zn-0.5Sn coating could offer some guidance to improve the surface performance of th......
期刊: JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY, 2021; 57 (1)
Atomic structure, diffusivity and viscosity of Al1-xMgx (x=0, 0.0039, 0.1172, 0.9180, 0.9961, 1)melts at 875, 1000, 1125, and 1250K were investigated ......