筛选条件 共查询到500条结果
排序方式
Experimental study of moment carrying behavior of typical Tibetan timber beam-column joints

期刊: ADVANCES IN STRUCTURAL ENGINEERING, 2021; 24 (11)

This study aimed to investigate the moment carrying behavior of typical Tibetan timber beam-column joints under monotonic vertical static load and als......

Temperature gradient modeling of a steel box-girder suspension bridge using Copulas probabilistic method and field monitoring

期刊: ADVANCES IN STRUCTURAL ENGINEERING, 2021; 24 (5)

A novel copula-based probabilistic model is proposed to establish the temperature difference analysis model for a long-span suspension bridge's steel ......

Research on wind barrier of canyon bridge-tunnel junction based on wind characteristics

期刊: ADVANCES IN STRUCTURAL ENGINEERING, 2021; 24 (5)

Due to the acceleration effect of the wind by the special geographical location of the canyon bridge-tunnel junction, the traffic safety and stability......

Seismic performance and shear bearing-capacity of truss SRC beam-column frame joints

期刊: ADVANCES IN STRUCTURAL ENGINEERING, 2021; 24 (7)

The structural performance of a frame joint is particularly important, which can determine the safe state of the global structure. For this reason, th......

Effects of the angle of attack on the aerodynamic characteristics of a streamlined box girder

期刊: ADVANCES IN STRUCTURAL ENGINEERING, 2021; 24 (10)

This paper presents experimental and numerical approaches to systematically investigate the aerodynamic characteristics of streamlined box girder at a......

Advances in coral aggregate concrete and its combination with FRP: A state-of-the-art review

期刊: ADVANCES IN STRUCTURAL ENGINEERING, 2021; 24 (6)

As an economical and eco-friendly construction material, coral aggregate concrete (CAC) plays an increasingly important role in emerging marine engine......

A new stiffness-strength-relationship-based design approach for global buckling prevention of buckling-restrained braces

期刊: ADVANCES IN STRUCTURAL ENGINEERING, 2021; 24 (7)

This paper proposes a new stiffness-strength-relationship-based design approach that can pinpoint the target design solution for steel buckling-restra......

Line-finite-element implementation for driven steel H-piles in layered sands considering post-driving residual stresses

期刊: ADVANCES IN STRUCTURAL ENGINEERING, 2021; 24 (7)

Driven Steel H-piles are commonly used in the deep foundation of being cost-effective and easy in workmanship. The post-driving residual stresses acti......

Experimental study on seismic performance of partially precast steel fiber high-strength concrete columns with high-strength steel bars

期刊: ADVANCES IN STRUCTURAL ENGINEERING, 2021; 24 (12)

To study the cyclic behavior of partially precast steel fiber high-strength concrete columns with high-strength steel bars, four full-sized square col......

Preliminary study on the threshold stiffness and residual displacement of the multangular-pyramid concave friction system (MPCFS) for seismic isolation

期刊: ADVANCES IN STRUCTURAL ENGINEERING, 2021; 24 (12)

In this research, the threshold stiffness and residual displacement of the MPCFS are both investigated. The MPCFS has a higher threshold (breakaway) s......

Displacement-based determination of BRBs in retrofitting an RC frame building

期刊: ADVANCES IN STRUCTURAL ENGINEERING, 2021; 24 (8)

An RC frame school building was designed with lower fortification requirements than required. It collapsed in the 2008 Ms8.0 Wenchuan earthquake. This......

The dynamic amplification factors for continuous beam bridges along high-speed railways

期刊: ADVANCES IN STRUCTURAL ENGINEERING, 2021; 24 (11)

In this paper, the dynamic amplification factors (DAFs) of high-speed railway continuous girder bridges are studied. The vehicle-bridge interactions (......

Mechanism of strength evolution of seawater OPC pastes

期刊: ADVANCES IN STRUCTURAL ENGINEERING, 2021; 24 (6)

This work investigated the strength degradation mechanisms of seawater ordinary Portland cement (OPC) pastes. Two types of specimens were prepared ((i......

Critical shear crack theory-based punching shear model for FRP-reinforced concrete slabs

期刊: ADVANCES IN STRUCTURAL ENGINEERING, 2021; 24 (6)

Owing to their high strength-to-weight ratio, superior corrosion resistance, and convenience in manufacture, fiber-reinforced polymer (FRP) bars can b......

Behaviour of the joint between slabs and walls composed of light steel and foam concrete

期刊: ADVANCES IN STRUCTURAL ENGINEERING, 2021; 24 (11)

Aiming at the prefabricated composite structure, a new type of interior joint in the prefabricated slab wall system suitable for light steel-concrete ......

共500条页码: 1/34页15条/页