期刊： WELDING JOURNAL, 2021; 100 (8)

In this paper, a type of Fe-Cr-C-B-Mn self-shielded metal -cored wire was developed to fabricate experimental hardfacing alloys. The slag-free mechani......

期刊： WELDING JOURNAL, 2021; 100 (3)

The control of the bubble in underwater wet welding (UWW) plays a crucial role in improving the process stability and metal transfer behavior. However......

期刊： WELDING JOURNAL, 2021; 100 (6)

A Si3N4 ceramic was successfully joined to molybdenum (Mo) using an Ag-Cu-Ti filler alloy. The interfacial microstructure of the Si3N4/Ag-Cu-Ti/Mo joi......

期刊： WELDING JOURNAL, 2021; 100 (1)

Low-carbon steel Q235B was successfully joined by plasma-pulsed gas metal arc welding (plasma-GMAW-P) with an external magnetic field. The arc profile......

期刊： WELDING JOURNAL, 2021; 100 (5)

While penetration occurs underneath the workpiece, the raw information used to detect it during welding must be measurable to a sensor attached to the......

期刊： WELDING JOURNAL, 2020; 99 (1)

The droplet transfer and voltage-current characteristics of gas metal arc welding (GMAW) in single-pulsed GMAW (single GMAW-P), plasma pulsed GMAW (pl......

期刊： WELDING JOURNAL, 2020; 99 (3)

Conventional pulsed laser-enhanced gas metal arc welding (GMAW) employs a single fiber laser focused and aimed on the droplet neck position to produce......

期刊： WELDING JOURNAL, 2020; 99 (3)

Resistance spot welds were produced between dissimilar 1.2-mm-thick wrought aluminum alloy AA6022-T4 and 2.0-mm-thick interstitial free (IF) steel wit......

期刊： WELDING JOURNAL, 2020; 99 (4)

Keyhole-mode laser welding under reduced ambient pressure is known to provide improved weld penetration, narrower width, and reduced incidences of def......

期刊： WELDING JOURNAL, 2020; 99 (5)

A hybrid welding technique formed by combining keyhole plasma arc welding (KPAW) and pulsed gas metal arc welding (GMAW-P) is characterized by the com......

期刊： WELDING JOURNAL, 2020; 99 (5)

The typical metal transfer mode in conventional underwater wet flux cored arc welding (FCAW) delivers large droplet repulsive transfer with low freque......

期刊： WELDING JOURNAL, 2020; 99 (6)

Due to a lack of facile methods for evaluating the reheat cracking susceptibility of the coarse grain heat-affected zone (CGHAZ), a simple notched C-r......

期刊： WELDING JOURNAL, 2020; 99 (6)

In this work, the spreading of a solder droplet on a substrate agitated by ultrasonic vibration was recorded by a high-speed camera. The dynamics and ......

期刊： WELDING JOURNAL, 2020; 99 (7)

Pulsed ultrasonic-assisted gas metal arc welding (PU-GMAW) is a newly developed welding method. Pulsed frequency is one of the most important paramete......

期刊： WELDING JOURNAL, 2020; 99 (8)

In this paper, a traditional resistance spot welding (RSW) process in combination with a GM-patented Multi-Ring Domed (MRD) electrode was used to join......