期刊： RAPID PROTOTYPING JOURNAL, 2021; 27 (6)
Purpose This paper aims to establish an appropriate annealing method, which is necessary for shape stability and to evaluate their potential degradati......
期刊： RAPID PROTOTYPING JOURNAL, 2021; 27 (5)
Purpose This study aims to accurately simulate the tilting separation process of mask projection stereolithography (MPSL) and verify the tilting theor......
期刊： RAPID PROTOTYPING JOURNAL, 2021; 27 (8)
Purpose The manufacturability of extremely fine porous structures in the SLM process has rarely been investigated, leading to unpredicted manufacturin......
期刊： RAPID PROTOTYPING JOURNAL, 2021; 27 (4)
Purpose Additively manufactured objects have layered structures, which means post processing is often required to achieve a desired surface finish. Fu......
期刊： RAPID PROTOTYPING JOURNAL, 2021; 27 (4)
Purpose The purpose of this study is to set up a dynamic model of material extrusion (ME) additive manufacturing plates for the prediction of their dy......
期刊： RAPID PROTOTYPING JOURNAL, 2021; 27 (5)
Purpose Traditional simulation research of geological and similar engineering models, such as landslides or other natural disaster scenarios, usually ......
期刊： RAPID PROTOTYPING JOURNAL, 2021; 27 (5)
Purpose The purpose of this study is to investigate the effect of the strut size and tilt angle on the densification behavior, surface roughness and d......
期刊： RAPID PROTOTYPING JOURNAL, 2021; 27 (7)
Purpose The purpose of this paper is to prepare metal/polymer composite materials prepared by additive manufacturing (AM) technology. Design/methodolo......
期刊： RAPID PROTOTYPING JOURNAL, 2021; 27 (8)
Purpose With the increasing demand for lightweight parts, the quality of the inner structure gained growing attention from different kinds of fields. ......
期刊： RAPID PROTOTYPING JOURNAL, 2021; 27 (7)
Purpose The purpose of this paper is to analyze and investigate heat accumulation caused by temperature changes and interface microstructure effected ......
期刊： RAPID PROTOTYPING JOURNAL, 2021; 27 (8)
Purpose In this paper, the mechanical properties and corrosion resistance of CoCr alloy fabricated by selective laser melting (SLM) were studied, and ......
期刊： RAPID PROTOTYPING JOURNAL, 2021; 27 (7)
Purpose The purpose of this paper is to solve the problems of poor mechanical properties, high surface roughness and waste support materials of thin-w......
期刊： RAPID PROTOTYPING JOURNAL, 2021; 27 (5)
Purpose This paper aims to investigate the influence of droplet infiltration and sliding on the deposition size and make a uniform deposition by contr......
期刊： RAPID PROTOTYPING JOURNAL, 2021; 27 (4)
Purpose This paper aims to show a series of hydrogels with adjustable mechanical properties, which can be cured quickly with visible light. The hydrog......
期刊： RAPID PROTOTYPING JOURNAL, 2021; 27 (4)
Purpose This paper aims at fabricating large metallic components with high deposition rates, low equipment costs through wire and wire and arc additiv......
